Micro-nano positioning / Motion controller

4 axis motion controller

DC motor with optical encoder
  • Absolute and relative move
  • Motion motor asserved on optical encoder integrated into the actuator
  • Limit switches (positive and negative) can be reversed or inhibited by software configuration
  • Power supply: +3.3V, +5V, -5V et +12V
  • Communication: CAN et RS485 ( ASCII)
  • Weight: 350g
Download datasheet
: 4 axis motion controller

2-axis control box

Stepper motors without encoder
  • Autonomic 2-axis system, controls up to 2 actuators
  • 4-wire bipolar stepper motors
  • Power supply: + 24V ± 10% (AC/DC converter supplied)
  • Dimensions: AC/DC converter: 50 x 115 x 35mm

Steering rack – CAN

CAN control
  • With incremental encoder reading & ENDAT
  • 16 stepper motors
  • CAN bus, Ethernet or USB control
  • Absolute and relative displacement
  • Motor advance in full or half steps
  • Bipolar type motor
  • Dimensions: 450mm x 3U x 210mm
Download datasheet
: Steering rack – CAN

Steering rack – PROFINET

PROFINET control
  • With incremental encoder reading and ENDAT
  • 12 stepper motors
  • Absolute and relative displacement
  • Motor advance in full or half steps
  • Bipolar type motor
  • Dimensions : 450mm x 3U x 210mm
Download datasheet
: Steering rack – PROFINET

2-axis motion controller box

Stepper motor without encoder
  • Autonomic system with 2-axis controller
  • Each axis is independent and has an analog control input
  • Allows external position control
  • Ability to manage limit switch and original sensor
  • Dimensions: 290 x 180 x 120 mm
  • Communication: RS232 (ASCII frame)
  • Power supply: 85-240VAC / 50-60Hz
Download datasheet
: 2-axis motion controller box

Communication gateway

Profinet / IO to Can
  • Bidirectional interface gateway between PROFINET network and CAN bus
  • Evolutionary structure: great personalization to customer requests
  • Internal buffer: high speed data transmission
  • Power supply: 24VDC / 100mA (VDC)
  • Dimensions: Rackable Europe format 100 x 160 mm
Download datasheet
: Communication gateway

Control board

Stepper motor with encoder
  • Bipolar stepper motor with single axis encoder interface
  • Absolute and relative displacement
  • Motor displacement in full steps or half steps
  • Codeur incrémental ou absolu (ENDAT)
  • Power suppy: 24 V
  • Control card by CanOpen
Download datasheet
: Control board

Control board

2 stepper motors
  • Bipolar stepper motor
  • 2 limit switch inputs (positive and negative) which can be reversed
  • Control: CAN bus use with CanOpen protocol for control of cards
  • Control: USB gateway for control via a provided Window interface
  • European format (100 mm x 160 mm) rackable

2 axis controller

For stepper motor without encoder
  • Bipolar stepper motor
  • Limit switches (positive and negative can be reversed/deactivated)
  • Absolute and relative movement
  • Motor displacement full step, 1/2 step, 1/4 step or 1/16pas
  • Dimensions: 130 x 50 x 20mm
  • Power supply: + 12-24VDC ± 5% 3A
Download datasheet
: 2 axis controller

All our products